5x Input 8x Output IRS Multiswitch made by Triax.
Complete with Earth Bar.
go to a compatible LNB here

5x Input 12x Output IRS Multiswitch made by Triax.
Complete with Earth Bar.
go to a compatible LNB here

5x Input 16x Output IRS Multiswitch made by Triax.
Complete with Earth Bar.
go to a compatible LNB here

DELTA BK22 Distribution Amp 5-862MHz
1 In, 1 Out, 20 dB, 100dBuV

Frequency range MHz: 5-862
Gain dB: 19...22
Noise figure dB: 7

Data Sheet

5-862MHz - 1 In, 1 Out, 23or31dB, 115dBuV

DELTA BKD 33 Launch Amp 5-862MHz

- GaAs-FET push-pull stage for high output level
- Low noise factor

Gain dB: 28/36 +/-1 Switchable
Frequency range MHz: 5-862
Noise dB: 4

Data Sheet

DELTA BKD36 Launch Amp 5-862MHz

- GaAs-FET push-pull stage for high output level
- Low noise factor

Gain dB: 28/36 +/-1 Switchable
Frequency range MHz: 5-862
Noise dB: 4

Data Sheet

3 inputs, 1 Output,
Gain : UHF 42 dBuV / FM 24 dBuV / DAB 34 dBuV
*High Output level
*DVB-T Suitable

Right click for info sheet (PDF file)

4 inputs, 1 Output,
Gain : UHF1 40 dBuV / UHF2 40 dBuV / FM 34 dBuV / DAB 34 dBuV
*High Output level
*DVB-T Suitable



Right click for info sheet (PDF file)

TELEVES 5399 Launch Amp VHF/UHF DTT
2 In, 1 Out, 40dB, 117dBuV

A two input, single output amplifier based on a split-band amplification philosophy (UHF/VHF) and input
independent attenuators, (UHF interstages attenuator for a low noise figure). A typical application is within a MATV system headend. It has DC bypass switches in both the (UHF) input and output.
SPECIAL ORDER

A single input, single amplifier based on a split-band amplification philosophy (47-454/470-862MHz) and band independent attenuators.

A single input, single output amplifier based on a split-band amplification philosophy (47-454/470-862MHz) and band independent attenuators.
A typical application is as a re-amplifier of MATV signals for its distribution in small and medium communals.

Band (MHz): 47-454
Gain (dB): 33+/-2
Maximum outpput level (DIN 45004B) (dBuV): > 115 typ.
Noise Figure (dB): < 6 typ.
Attenuator (dB): 0-20
2nd order distort. (Vo=106 dBuV) (dB): 50

Band (MHz): 470-862
Gain (dB): 34+/2 43+/-2
Maximum outpput level (DIN 45004B) (dBuV): > 116 typ.
Noise Figure (dB): < 6.5 typ.
Attenuator (dB): 0-15
2nd order distort. (Vo=106 dBuV) (dB): --

Mains voltage (V~): 230+/-10%
Max. power consumption (W): 9
Input DC bypass (automatic) (mA): 60 (24V=)
Protection level: IP20
SPECIAL ORDER

TELEVES 5323 Launch Amp VHF/UHF DTT
1 In, 1 Out, 40dB, 122 dBuV

This is a one input port amplifier based on a split-band amplification philosophy (UHF & VHF) and independent attenuators, (UHF interstages attenuator for a low noise figure).
It is enclosed into a robust diecast chassis and intended for the distribution of digital terrestrial signalsand has DC bypass switches in both the input and output.

Band (MHz): 47-422
Gain (dB): 35+/-3
Maximum outpput level (DIN 45004B) (dBuV): > 115
Noise Figure (dB): 6
Attenuator (dB): 0-20
2nd order distort. (Vo=106 dBuV) (dB): 50

Band (MHz): 470-862
Gain (dB): 45+/-3
Maximum outpput level (DIN 45004B) (dBuV): > 122
Noise Figure (dB): 5.5
Attenuator (dB): 0-18
2nd order distort. (Vo=106 dBuV) (dB): --

Mains voltage (V~): 230+/-15%
Max. AC power consumption (W): 23
Power consumption (mA): 350 (24V=)
Max. DC bypass input and/or output (mA): 700 max. (24V=)
Protection level: IP30
SPECIAL ORDER
Data Sheet

TELEVES 5385 Launch Amp VHF/UHF
1 In, 1 Out, 54dB, 124dBuV

This is a one input port "compact amplifier" based on a split-band amplification philosophy (UHF and VHF). It is enclosed into a robust diecast chassis and is intended for distribution re-amplifications.
Input attenuator for each input.

Data Sheet

JOHANSSON 6503 Multi CH Filter-Equaliser

The Johansson 6503 is a truely versatile unit suitable for use with any transmitter in the UK. Fully programmable for analogue and digital terrestrial channels. Level adjustment is included for each cluser, it has 5dB gain and is mains powered which makes this new idea in channel equalisation/filtering revolutionary.

JOHANSSON Multi Channel PROFILER

An extremely flexible headend amplifier. The Profiler allows the installer the facility of filtering up to 10 channels from 3 UHF, 1 VHF-UHF, 1 DAB & 1 FM inputs. Each filtered channel can be either a single analogue, a digital mux or a cluster of each, as the bandwidth for each channel can be set from 1 to 7 channels wide. With a massive 55dB gain, 123dB output and remote powering for mastheads this is a truly one stop shop as far as headend amplifiers go.
LOW NOISE FIGURE:LESS THAN 6dB

Data Sheet

Channel Filter Leveller - 6 Channel version
1 Output.
Choice of 1 or 6 Inputs. (Please choose)

TELEVES 4162 Adjustable Notch Filter
Double notch filter - 2 settings

- A adjustable notch filter, which can be tuned to reject unwanted UHF channels
- Not recommended for less than three channel spacing

2 channels, 2 adjustments
Insertion Loss (dB): < 1 (UHF), < 2 (B111), < 15 (B1), < 10 (FM)
Return Loss (dB): > 10
DC Bypass: Yes
Frequency stability (KHz/degreeC): < 100

The stacker allows 2 lnbs to be combined down one cable, ideal where a two cable solution is not desired. The De-stacker then separates the two LNB signals enabling for example the two LNB inputs for a Sky+ receiver.

The standard version of the Stacker/De-stacker is designed for cable runs of up to 30 metres.
Data Sheet


Related products:

1. GLOBAL Stacker / De-Stacker `PLUS` 1 Cable Solution (Operates up to 60m) (Ref: AVA28082)

GLOBAL STACKER/DE-STACKER 'PLUS'

The stacker allows 2 lnbs to be combined down one cable, ideal where a two cable solution is not desired. The De-stacker then separates the two LNB signals enabling for example the two LNB inputs for a Sky+ receiver.

The Plus version of the Stacker/De-stacker is designed for cable runs of up to 60 metres.
Data Sheet


Related products:

1. GLOBAL Stacker / De-Stacker 1 Cable Solution (Operates up to 30m) (Ref: AVA28080)

TRIAX CM01U UHF Modulator
Output can be set to channels 21-69
PLL Modulator with Video and audio input via Phono connections and channel select via dip switches.

Frequency range 5-1000MHZ.
Fully screened RF shielded Zink Die-Cast housing with Nickel Plating and Earth Terminal built in.
All Ports are 75ohm 'F' type with low Insertion loss.
470-860 MHz: 3.8

Frequency range 5-1000MHZ.Fully screened RF shielded Zink Die-Cast housing with Nickel Plating and Earth Terminal built in.
All Ports are 75ohm 'F' type with low Insertion loss.
470-860 MHz: 7.8

Frequency range 5-1000MHZ.Fully screened RF shielded Zink Die-Cast housing with Nickel Plating and Earth Terminal built in.
All Ports are 75ohm 'F' type with low Insertion loss.
Insertion Loss (dB)
470-860 MHz: 10.5

Frequency range 5-1000MHZ.Fully screened RF shielded Zink Die-Cast housing with Nickel Plating and Earth Terminal built in.
All Ports are 75ohm 'F' type with low Insertion loss.
Insertion Loss (dB)
40-470 MHz: 11.2

Frequency range 5-1000MHZ.Fully screened RF shielded Zink Die-Cast housing with Nickel Plating and Earth Terminal built in.
All Ports are 75ohm 'F' type with low Insertion loss.
Insertion Loss (dB)
40-470 MHz: 11.2

The 8 Way Extender Amplifier can be connected the main TV Amplifier to add additional TV Outlets to the system. One Amp Adder is required per TV Extender Amplifer.
This item is specifically designed for mounting into 'Home Network Panels' and other enclosures.

The 16 Way Extender Amplifier can be connected the main TV Amplifier to add additional TV Outlets to the system. One Amp Adder is required per TV Extender Amplifer.
This item is specifically designed for mounting into 'Home Network Panels' and other enclosures.